MAN TGA 26.390 6x2 Kroll Combi vacuum opbouw met water terugwin systeem

ID number 38232
License plate 43-BG-S9
1st registration 01-12-2006
Mileage 302342 km
Year 2006
Chassis number WMAH18ZZ96W069164
Fuel Diesel
Euro norm Euro 3

Price on request

Accessoires

  • Anti-lock braking system
  • Cruise control
  • PTO
  • Radio/CD player
  • Reversing camera

Comments

Kroll suction / coil build-up with water recovery installation
Content total 14,000 liters
Expression shot
VACUUM PUMP:
Make Gardner-Denver-Wittig
Type Aqualine 2700
Flow rate 2,075 m3 / h at 60% vacuum (400 mbar)
Maximum vacuum 80% (200 mbar)
Speed ​​1,500 min-1
Drive power 84 kW at 0.5 bar operating pressure
Mounting: low-maintenance side of the subframe
Drive: elastic, via cardan shafts and V-belts and pneumatically switchable
Friction clutch.
Cooling: approx. 1,000 l process water tank, cooler with fan 24 V, circulating pump
and thermal switch.

HIGH PRESSURE PUMP:
System Three-plunger press pump
Manufacturer URACA
Type P3 - 45
Plunger Dia. 70 mm ceramic coated
Delivery rate 473 l / min.
Pressure 150 bar
Drive power 130 kW
Drive speed 1,800 min-1
Gear ratio 3.13
Crankshaft speed 575 min-1
Mounting: low-maintenance on the side of the subframe, pumpheads on the outside.
Drive: elastic, via cardan shafts and V-belts and pneumatically switchable
Friction clutch.

LARGE TUBING HASP:
firmly connected to the suction hose boom at the end, transversely at the end,
hydraulically tiltable and lockable by 180 °, stepless hydraulic
Drive in both directions, designed for 250 m HD hose DN 32 (1 ¼ "),
complete with 240 m high pressure synthetic hose (Nylaflex) 1 ¼ "
Parker Red Snake. In addition with freewheel device with accordingly additional.
Switch and hydr. Bypass.
SMALL TUBING HASP:

Rear right, hydraulically operated, designed for 60 m
(½ ") HD hose DN 13, complete with 60 m (½") HD hose DN 13.
With freewheel device via switch and hydr. Bypass.
CONTAINER WITH CLOSURE FLOOR:
cylindrical, casing wall thickness 6 mm, outer bottoms in dished form
made of sheet steel S235JRG2 (St. 37.2) electrically welded
Sealing of the closure bottom with profile seal in oil-ester version.

Capacity 13,000 l air volume perm. Tank overpressure -1 / 0.5 bar
Vacuum designed for 100%
Test pressure 0.65 bar
Calculation temperature 20 ° / 50 ° C

Contents display:
Water chamber: one tube sight glass left and right with
appropriate scaling for piston positions.
Mud chamber: one tank contents indicator with PE ball
and outer display left and right.

CLOSURE BOTTOM:
with two laterally arranged hydraulic cylinders across the entire cross section
to open upwards. Securing the raised bottom of the lock:
hydraulically via a single-acting pilot operated check valve in each
Cylinder installed.

CONTAINER SUBDIVISION:
the pneumatically actuated Ausschubkolben also serves to divide the
Container in water and mud chamber, the extension piston is from
lock manually with single locking by hand, leaving two
Piston positions result in varying the water chamber or the
Allow mud chamber.

General

Dimensions (cm) 1020 x 255 x 400
Overall condition Good
Technical condition Good
Optical condition Good

Chassis

Own weight (kg) 19550
Loading capacity (kg) 6450
GVW (kg) 26000
Wheelbase (cm) 450

Powertrain

Transmission Manual
Cylinder capacity (cc) 10518
Engine power (pk) 392
Engine power (kw) 288

Axle configuration (6x2)

#1 #2 #3
Tire size 385/65-22.5 315/80-22.5 315/80-22.5
Profile left/right (%) 50 / 50 50:50 / 50:50 50 / 50
Suspension Leaf Air Air
Maximum axle load (kg) 8000 11500 7500
Reduction - Single -
Axle lift
Steering
Powered
Drag from right to left

Questions?

All prices are excluding VAT.
All specifications are subject to change. The given mileage, sizes, weights and other specifications are not legally binding.

Our general sales conditions